Equipment Introduction

●This product can dry various printed, blown, and burnt-out knitted and woven fabrics through the conveyor belt and high-efficiency axial flow fan.

Technical data:

●Nominal width: 1800-3600mm (customizable)

●Working speed: 0-70m/min

●Overfeed: -10%-30%

●Radiator: extrusion type or tube-and-tube fin type

●Natural gas heater: American McKesson, British Hankford

●Drying room temperature: medium pressure steam heating: 1900C, heat oil heating: 210℃, burner heating: 210℃

●Evaporation: not less than 150kg/h per box

●Installed power: 141Kw (drying room is 8 sections)

●Overall dimensions: length × width × height (mm) 33010 × 5000 × 3880

Equipment features:

●Five-layer, extra-wide conveyor belt, can run single or multiple cloths at the same time, with high efficiency.

●Cloth feed rack configuration: Extend the arm and extend it above the end of the printing dryer guide belt, and the belt drives the cloth into the drying room.

●Electrical control: PLC programmable control and variable frequency speed regulation are adopted.

●The temperature of each drying room can be automatically controlled (circulating fan variable frequency control, optional according to user requirements).

●Automatic deviation correction and fault reporting. The correction adopts pneumatic control, which is stable and reliable to use.

●The radiator has high thermal efficiency and strong evaporation capacity.

●After pre-shrinkage and drying treatment, the fabric can obtain the ideal color feel, so that its printing slurry remains stable, the color is bright, the color fastness is good, and the feel is excellent.